Dell Force10 Z9000 - Page 159

Refer to Example (stack-unit). The unit ID range for the S4810 is 0 to
11.
summary (OPTIONAL) Enter the keyword summary to view a summary view of
CPU usage for all members of the stack. Refer to Example (summary).
ipc (OPTIONAL) Enter the keyword ipc to display interprocess
communication statistics.
memory (OPTIONAL) Enter the keyword memory to display memory statistics.
Refer to Example (memory).
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.7.1.0 Added the keywords management-unit [details].
Version 7.6.1.0 Introduced on the S-Series.
Example
(summary)
FTOS#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
-------------------------------------------
Unit0 0% 0% 0%
CPU utilization 5Sec 1Min 5Min
-------------------------------------------
Unit1* 1% 0% 0%
Unit2 0% 0% 0%
Unit3 0% 0% 0%
* Mgmt Unit
Example
(management-
unit)
FTOS#show processes cpu management-unit 0
CPU utilization for five seconds: 1%/0%; one minute: 10%; five
minutes: 2%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY
Process
272 20 2 10000 0.00% 0.00% 0.00% 0
topoDPC
271 0 0 0 0.00% 0.00% 0.00% 0
bcmNHOP
270 0 0 0 0.00% 0.00% 0.00% 0
bcmDISC
269 0 0 0 0.00% 0.00% 0.00% 0
bcmATP-RX
268 0 0 0 0.00% 0.00% 0.00% 0
bcmATP-TX
267 30 3 10000 0.00% 0.00% 0.00% 0
bcmSTACK
266 380 38 10000 0.00% 0.00% 0.08% 0
bcmRX
265 30 3 10000 0.00% 0.00% 0.00% 0
bcmLINK.0
264 0 0 0 0.00% 0.00% 0.00% 0
bcmXGS3AsyncTX
263 0 0 0 0.00% 0.00% 0.00% 0
bcmTX
262 160 16 10000 0.00% 0.00% 0.00% 0
bcmCNTR.0
159