Dell Force10 Z9000 - Page 1034

• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the E-Series, the range
is 1 to 255 for TeraScale and 1 to 512 for ExaScale.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by the VLAN
ID. The range is from 1 to 4094.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.7.0 Introduced on the S4810.
Example
FTOS#show ipv6 neighbors
IPv6 Address Expires(min) HardwareAddress State Interface/VLAN/
CPU
---------------------------------------------------------
fe80::201:e8ff:fe17:5bc6
1439 00:01:e8:17:5b:c6 STALE Gi 1/9 - CP
fe80::201:eff:fe17:5bc7
1439 00:01:e8:17:5b:c7 STALE Gi 1/10 - CP
fe80::201:e8ff:fe17:5bc8
1439 00:01:e8:17:5b:c8 STALE Gi 1/11 - CP
fe80::201:e8ff:fe17:5caf
0.3 00:01:e8:17:5c:af REACH Po 1 - CP
fe80::201:e8ff:fe17:5cb0
1439 00:01:e8:17:5c:b0 STALE Po 32 - CP
fe80::201:e8ff:fe17:5cb1
1439 00:01:e8:17:5c:b1 STALE Po 255 - CP
fe80::201:e8ff:fe17:5cae
1439 00:01:e8:17:5c:ae STALE Gi 1/3 Vl 100 CP
fe80::201:e8ff:fe17:5cae
1439 00:01:e8:17:5c:ae STALE Gi 1/5 Vl 1000 CP
fe80::201:e8ff:fe17:5cae
1439 00:01:e8:17:5c:ae STALE Gi 1/7 Vl 2000 CP
FTOS#
1034