Dell Force10 Z9000 - Page 1124

outbound ah sas
spi : 500 (0x1f4)
transform : ah-md5-hmac
in use settings : {Transport, }
replay detection support : N
STATUS : ACTIVE
inbound esp sas
outbound esp sas
Interface: TenGigabitEthernet 0/1
Link Local address: fe80::201:e8ff:fe40:4d11
IPSecv6 policy name: OSPFv3-1-600
inbound ah sas
outbound ah sas
inbound esp sas
spi : 600 (0x258)
transform : esp-des esp-sha1-hmac
in use settings : {Transport, }
replay detection support : N
STATUS : ACTIVE
outbound esp sas
spi : 600 (0x258)
transform : esp-des esp-sha1-hmac
in use settings : {Transport, }
replay detection support : N
STATUS : ACTIVE
show crypto ipsec sa ipv6 Command Fields
Field Description
Interface
IPv6 interface
Link local address
IPv6 address of interface
IPSecv6 policy name
Name of the IPsec security policy applied to the interface.
inbound/outbound ah
Authentication policy applied to inbound or outbound
traffic.
inbound/outbound esp
Encryption policy applied to inbound or outbound traffic.
spi
Security policy index number used to identify the policy.
transform
Security algorithm that is used to provide authentication,
integrity, and confidentiality.
in use settings
Transform that the SA uses (only transport mode is
supported).
replay detection support Y: An SA has enabled the replay detection feature.
N: The replay detection feature is not enabled.
STATUS
ACTIVE: The authentication or encryption policy is
enabled on the interface.
1124