Dell Force10 Z9000 - Page 1305

Parameters
name Enter a text string for the name of the user up to 63 characters.
access-class
access-list-name
Enter the keywords access-class followed by the name of a
configured access control list (either a IP access control list or MAC
access control list).
nopassword Enter the keyword nopassword to specify that the user should not
enter a password.
password Enter the keyword password followed by the encryption-type
or the password.
secret Enter the keyword secret followed by the encryption-type or
the password.
encryption-type Enter an encryption type for the password that you will enter.
• 0 directs FTOS to store the password as clear text. It is the
default encryption type when using the password option.
• 7 to indicate that a password encrypted using a DES hashing
algorithm will follow. This encryption type is available with
the password option only.
• 5 to indicate that a password encrypted using an MD5
hashing algorithm will follow. This encryption type is
available with the
secret option only, and is the default
encryption type for this option.
password Enter a string up to 32 characters long.
privilege level Enter the keyword privilege followed by a number from zero (0)
to 15.
secret Enter the keyword secret followed by the encryption type.
Defaults The default encryption type for the password option is 0. The default encryption type for the
secret option is 0.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Added support for the secret option and the MD5 password
encryption. Extended the name from 25 to 63 characters.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
To view the defined user names, use the show running-config user command.
1305