stp Display the VLT statistics for STP.
Default Not configured.
Command Modes EXEC
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.12.0 Added support in the output for ARP, MAC, and IGMP snooping.
Version 8.3.8.0 Introduced on the S4810.
Example
NOTE: The following Example shows the statistics for
all
of the VLT parameters. If you
enter a specific keyword, such as mac, only the statistics for that VLT parameter displays.
FTOS_VLTpeer1#show vlt statistics
VLT Statistics
----------------
HeartBeat Messages Sent: 930
HeartBeat Messages Received: 909
ICL Hello's Sent: 927
ICL Hello's Received: 910
Domain Mismatch Errors: 0
Version Mismatch Errors: 0
Config Mismatch Errors: 0
VLT MAC Statistics
----------------
L2 Info Pkts sent:6, L2 Mac-sync Pkts Sent:0
L2 Info Pkts Rcvd:3, L2 Mac-sync Pkts Rcvd:2
L2 Reg Request sent:1
L2 Reg Request rcvd:2
L2 Reg Response sent:1
L2 Reg Response rcvd:1
VLT Igmp-Snooping Statistics
-------------------------------
IGMP Info Pkts sent: 4
IGMP Info Pkts Rcvd: 1
IGMP Reg Request sent: 1
IGMP Reg Request rcvd: 2
IGMP Reg Response sent: 1
IGMP Reg Response rcvd: 1
IGMP PDU Tunnel Pkt sent: 5
IGMP PDU Tunnel Pkt rcvd: 10
IGMP Tunnel PDUs sent: 10
IGMP Tunnel PDUs rcvd: 19
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Related
Commands
clear vlt statistics – clears the statistics on VLT operations.
1465
To Next Page
Loading...
