Dell Force10 Z9000 - Page 149

Command History
Version 8.3.11.4 Output expanded to include Piece Part ID (PPID) and eSR4 optics.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced this version of the command for S-Series. S-Series output
differs from E-Series.
Usage
Information
If there are no fiber ports in the unit, just the header under show inventory media displays. If
there are fiber ports but no optics inserted, the output displays Media not present or
accessible .
Example (S-
Series)
FTOS#show inventory
System Name : S50v
system Mode : 1.0
Software Version : 7.6.1.0a
Unit Type Serial Number Part Number Revision
--------------------------------------------------------------
0 *S50-01-GE-48T-V DL267050013 7590003600 B
0 S50-01-10GE-2C N/A N/A N/A
0 S50-PWR-AC N/A N/A N/A
0 S50-FAN N/A N/A N/A
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
Example (S-
Series)
S50V_7.7#show inventory media ?
<0-7> Slot number
| Pipe through a command
<cr>
S50V_7.7#show inventory media
Slot Port Type Media Serial Number F10Qualified
---------------------------------------------------
0 49 Media not present or accessible
0 50 XFP 10GBASE-SR C707XS0MD Yes
0 45 Media not present or accessible
0 46 Media not present or accessible
0 47 Media not present or accessible
0 48 Media not present or accessible
Example (Z9000)
ct-z9000-2#show inventory
System Type : Z9000
System Mode : 1.0
Software Version : 8.3.11.3b
Unit Type Serial Number Part Number Rev Piece
Part ID
Ver Service Tag
-------------------------------------------------------------
* 0 Z9000-01-40GE-AC Z8FX113100314 7520052401 E
MY-08R4VK-75412-1BA-0474 A00 ABC1234
0 Z9000-PWR-AC N/A N/A N/A N/A
N/A N/A
0 Z9000-FAN Z5FX112500170 7520051702 A
MY-08R4VK-75412-1BA-0474 A00 ABC1234
149