Backend State:          Initialize
FTOS#
Example (mac-
address)
FTOS#show dot1x interface gig 2/21 mac-address 
00:00:01:00:07:00
802.1x information on Gi 2/21:
-----------------------------
Dot1x Status:           Enable
Port Control:           AUTO
Re-Authentication:      Disable
Guest VLAN:             Disable
Guest VLAN id:          NONE
Auth-Fail VLAN:         Disable
Auth-Fail VLAN id:      NONE
Auth-Fail Max-Attempts: NONE
Mac-Auth-Bypass:        Enable
Mac-Auth-Bypass Only:   Disable
Tx Period:              5 seconds
Quiet Period:           60 seconds
ReAuth Max:             1
Supplicant Timeout:     30 seconds
Server Timeout:         30 seconds
Re-Auth Interval:       60 seconds
Max-EAP-Req:            2
Host Mode:              MULTI_AUTH
Max-Supplicants:        128
Port status and State info for Supplicant: 00:00:01:00:07:00
Port Auth Status:       AUTHORIZED(MAC-AUTH-BYPASS)
Untagged VLAN id:       4094
Auth PAE State:         Authenticated
Backend State:          Idle
FTOS#
Example 
(Interface)
FTOS#show dot1x interface g 0/21
802.1x information on Gi 0/21:
-----------------------------
Dot1x Status:           Enable
Port Control:           AUTO
Re-Authentication:      Disable
Guest VLAN:             Enable
Guest VLAN id:          100
Auth-Fail VLAN:         Disable
Auth-Fail VLAN id:      NONE
Auth-Fail Max-Attempts: NONE
Mac-Auth-Bypass:        Disable
Mac-Auth-Bypass Only:   Disable
Tx Period:              30 seconds
Quiet Period:           60 seconds
ReAuth Max:             3
Supplicant Timeout:     30 seconds
Server Timeout:         30 seconds
Re-Auth Interval:       60 seconds
Max-EAP-Req:            2
Host Mode:              MULTI_AUTH
Max-Supplicants:        128
Port status and State info for Supplicant: 00:00:00:00:00:10
209