ip-address
(OPTIONAL) Enter the IP address of the neighbor to view only BGP
information exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view
only the routes the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific
internal information for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s
feasible routes.
received-routes
[
network
[
network-mask
]
(OPTIONAL) Enter the keywords received-routes followed by
either the network address (in dotted decimal format) or the network
mask (in slash prefix format) to view all information received from
neighbors.
NOTE: You must configure the neighbor soft-
reconfiguration inbound
command prior to viewing all
the information received from the neighbors.
denied-routes
[
network
[
network-mask
]
(OPTIONAL) Enter the keywords denied-routes followed by
either the network address (in dotted decimal format) or the network
mask (in slash prefix format) to view all information on routes denied
via neighbor inbound filters.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Added the add-path option to the S4810. Output on the S4810
shows the ADDPATH parameters.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.5.1.0 Added the detail option. Output now displays the default MED
value.
Version 7.2.1.0 Added the received and denied route options.
Version 6.3.10 The output is changed to display the total number of advertised
prefixes.
Usage
Information
After a peer reset, the contents of the notification log messages is displayed in hex values for
debugging.
402
To Next Page
Loading...
