Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series.
Usage
Information
The display reflects the settings implemented with the cam-acl command.
Example (Default)
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 6
Ipv4Acl : 5
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
VmanDualQos: 0
Ipv4pbr : 0
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 6
Ipv4Acl : 5
Ipv6Acl : 0
Ipv4Qos : 1
L2Qos : 1
L2PT : 0
IpMacAcl : 0
VmanQos : 0
VmanDualQos: 0
Ipv4pbr : 0
FTOS#
Example (Non-
Default)
FTOS#show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 2
Ipv4Qos : 2
L2Qos : 2
L2PT : 1
IpMacAcl : 2
VmanQos : 0
VmanDualQos: 0
Ipv4pbr : 0
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 5
Ipv4Acl : 5
Ipv6Acl : 1
Ipv4Qos : 1
L2Qos : 1
L2PT : 0
552
To Next Page
Loading...
