• For the management interface on an RPM, enter the keyword
ManagementEthernet followed by the slot/port
information. The slot range is 0 to 1 and the port range is 0.
• For a Null interface, enter the keywords null 0.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword sonet followed by
the slot/port.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
• For a VLAN interface, enter the keyword vlan followed by a
number from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.1(0.0) Updated ManagementEthernet output to include two global IPv6
addresses on S4810 and Z9000 and added output example showing
OpenFlow instance ID.
Version 8.3.12.1 Updated command output to support multiple IPv6 addresses on
S4810.
Version 8.3.11.4 Output expanded to support eSR4 optics in Z9000.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.2 Included SFP and SFP+ optics power detail in the E-Series and C-
Series output.
Version 8.2.1.0 Added support for 4093 VLANs on the E-Series ExaScale. Prior
releases supported 2094.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Output expanded to include SFP+ media on the C-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.4.1.0 Changed the organization of the display output.
Version 6.3.1.0 Added the Pluggable Media Type field in the E-Series TeraScale
output.
721
To Next Page
Loading...
