Dell Force10 Z9000 - Page 739

Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.2.1.0 Added support for 4093 VLANs on E-Series ExaScale.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Support added for hybrid port/native VLAN, introduced on the S-
Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
The following describes the show interfaces switchport command for the Example
below.
Items Description
Name Displays the interface’s type, slot, and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or
hybrid (“Hybrid”), which supports both untagged and tagged VLANs
by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. Starting with
FTOS version 7.6.1, this field can display native VLAN membership by
port 13/0.
Example
FTOS#show interfaces switchport
Name: GigabitEthernet 13/0
802.1QTagged: Hybrid
Vlan membership:
Vlan 2, Vlan 20
Native VlanId: 20
Name: GigabitEthernet 13/1
802.1QTagged: True
Vlan membership:
Vlan 2
Name: GigabitEthernet 13/2
802.1QTagged: True
Vlan membership:
Vlan 2
Name: GigabitEthernet 13/3
802.1QTagged: True
Vlan membership:
Vlan 2
--More--
739