Dell Force10 Z9000 - Page 83

users
for the current users configuration
vlt
for the current VLT configuration
wred-profile
for the current wred-profile configuration
configured (OPTIONAL) Enter the keyword configuration to display line
card interfaces with non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for
the running configuration and the start-up configuration.
Command Modes EXEC Privilege
Command History
Version 9.0.0.0 Added support for the VLT option.
Version 7.8.1.0 Added the hardware-monitor option.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Expanded to include the last configuration change, start-up last
updated (date and time), and who made the change.
Version 6.5.4.0 Added the status option.
Example
FTOS#show running-config
Current Configuration ...
! Version 7.4.1.0
! Last configuration change at Tue Apr 10 17:43:38 2007 by
admin
! Startup-config last updated at Thu Mar 29 02:35:08 2007 by
default
!
boot system rpm0 primary flash://FTOS-EF-7.4.1.0.bin
boot system rpm0 secondary flash://FTOS-EF-6.3.1.2.bin
boot system rpm0 default flash://FTOS-EF-6.5.1.8.bin
!
...
Example
FTOS#show running-config status
running-config checksum 0xB4B9BF03
startup-config checksum 0x8803620F
FTOS#
Usage
Information
The status option allows you to display the size and checksum of the running configuration
and the startup configuration.
83