Dell Force10 Z9000 - Page 1144

Field Description
• L = local to the multicast group
• P = route was pruned
• R = the forwarding entry is pointing toward the RP
• F = FTOS is registering this entry for a multicast source
• T = packets were received via Shortest Tree Path
• J = first packet from the last hop router is received and the
entry is ready to switch to SPT
• K = acknowledge pending state
Incoming interface Displays the reverse path forwarding (RPF) interface towards the RP/
source.
RPF neighbor Displays the next hop from this interface towards the RP/source.
Outgoing interface
list:
Lists the interfaces that meet one of the following criteria:
• a directly connect member of the Group
• statically configured member of the Group
• received a (*,G) Join message
Example
FTOS#show ip pim tib
PIM Multicast Routing Table
Flags:D- Dense, S- Sparse, C- Connected, L- Local, P- Pruned,
R- RP-bit set, F- Register flag, T- SPT-bit set, J- Join
SPT,
M- MSDP created entry, A- Candidate for MSDP
Advertisement,
K- Ack-Pending State
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 226.1.1.1), uptime 01:29:19, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor
10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
(*, 226.1.1.2), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor
10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
(*, 226.1.1.3), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor
10.211.1.2
Outgoing interface list:
GigabitEthernet 8/0
(*, 226.1.1.4), uptime 00:18:08, expires 00:00:52, RP
10.211.2.1, flags: SCJ
Incoming interface: GigabitEthernet 4/23, RPF neighbor
1144