Enterasys Matrix DFE-Gold Series

show license Activating Licensed Features
Enterasys Matrix DFE-Gold Series Configuration Guide 2-59
Parameters
Defaults
Ifnotspecified,thelicensewillbeboundtoallmodules.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtouselicensekeyabcdefg123456789toactivateadvancedrouting
features:
Matrix(rw)->set license advanced abcdefg123456789
show license
Whenavailableandactivated,usethiscommandtodisplayyourlicensekey.
Syntax
show license
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtodisplayyourlicensekeyinformation:
Matrix(rw)->show license
advanced abcdefg123456789
advanced Activatesadvancedroutingfeatures.
redundancy Activatesmanagementmoduleredundancy.
license‐key Specifiesyourunique16‐digithexadecimaladvancedlicensingkey.
Note: When available, the licensing key will display at the top of the show
running-config command output.To see an example of this output, refer to
“show running-config” on page 16-8.
slotslot (Optional)Specifiesamoduletowhichthelicensewillbebound.