show port discard Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Enterasys Matrix DFE-Gold Series Configuration Guide 7-15
show port discard
Usethiscommandtodisplaytheframediscardmodeforoneormoreports.
Syntax
show port discard [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,framediscardedmodewillbedisplayedforallports.
Mode
Switchcommand,Read‐Only.
Usage
PortscanbesettodiscardframesbasedonwhetherornottheycontainaVLANtag.Theycanalso
besettodiscardbothframetypesornoneoftheframesreceived.
Example
ThisexampleshowshowtodisplaytheframediscardmodeforFastEthernetport7inmodule2.
Inthiscase,theporthasbeensettodiscardalltaggedframes:
Matrix(rw)->show port discard fe.2.7
Port Discard Mode
------------ -------------
fe.2.7 tagged
set port discard
Usethiscommandtosettheframediscardmodeononeormoreports.
Syntax
set port discard port-string {tagged | untagged | none | both}
Parameters
Defaults
None.
port‐string (Optional)Displaystheframediscardmodeforspecificport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
port‐string Specifiestheport(s)forwhichtosetframediscardmode.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
tagged|untagged|
none|both
Setstheport(s)todiscardtaggedoruntaggedframes,noframes,
or
bothtypesofframes.