Enterasys Matrix DFE-Gold Series

show dot1x Configuring 802.1X Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 25-3
selectedports,whichresultsinallowingordenyingnetworkaccessaccordingtoRADIUSserver
configuration.
Commands
show dot1x
Usethiscommandtodisplay802.1Xstatus,diagnostics,statistics,andreauthenticationor
initializationcontrolinformationforoneormoreports.
Syntax
show dot1x [auth-config | access-entity | auth-diag | auth-session-stats auth-
stats [all] [port-string] [index index-list] | [mac [ all] mac [ port-string] [index
index-list] | [port [init | reauth]] [port-string]]
Parameters
Defaults
•Ifnoparametersarespecified,802.1Xstatuswillbedisplayed.
•Ifallisnotspecified,onlyactiveentrieswillbedisplayed.
•Ifindexisnotspecified,informationforallaccessentitieswillbedisplayed.
•Ifport‐stringisnotspecified,informationforallportswillbedisplayed.
For information about... Refer to page...
show dot1x 25-3
show dot1x auth-config 25-5
set dot1x 25-7
set dot1x auth-config 25-7
clear dot1x auth-config 25-9
auth‐config (Optional)Displaysauthenticationconfigurationinformation.
access‐entity (Optional)Displaysaccessentityinformation.
auth‐diag (Optional)Displaysauthenticationdiagnosticsinformation.
auth‐session‐stats (Optional)Displaysauthenticationsessionstatistics.
auth‐stats (Optional)Displaysauthenticationstatistics.
all (Optional)Displaysinactiveandactiveauthenticationentries.
macallmac DisplaysinformationforoneorallMACaddresses.
indexindex‐list (Optional)
Displaysinformationforoneormoreaccessentities.Valid
valuesare0‐8191.
portinit|reauth (Optional)Displaysthestatusofportinitialization andreauthentication
control.
port‐string (Optional)Displaysinformationforspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
Usedinthe
CLI”onpage 4‐2.