To Next Page

To Previous Page

Configuring Policy Class of Service (CoS) set cos reference irl

8-36 Policy Classification Configuration

0.1 12 txq 3

0.1 13 txq 3

0.1 14 txq 3

0.1 15 txq 3

set cos reference irl

UsethiscommandtosetaClassofServiceinboundratelimitingreferenceconfiguration.

Syntax

set cos reference irl group-type-index reference rate-limit number

Parameters

Defaults

None.

Mode

Switchcommand,Read‐Write.

Example

Thisexampleshowshowtoconfigureinboundratelimitingreferenceentry0forportgroup0.1

referencingresourcesdefinedbyIRLentry0:

Matrix(rw)->set cos reference irl 0.1 0 rate-limit 0

clear cos reference irl

UsethiscommandtoclearoneorallClassofServiceinboundratelimitingreference

configurations.

Syntax

clear cos reference irl {all | group-type-index reference}

Parameters

group‐type‐index Specifiesaninboundratelimitingportgroup/typeindexforthisentry.

Validentriesareinthe formofgroup.type.Groupcanbe0‐7,with0

designatingthedefaultgroup,and1‐7reservedforuser‐defined

groups.Defaultporttypevaluescannotbechanged,andare0

forthe

7GR4270‐12,7G4270‐12,7G4270‐09,and7G4270‐10DFEmodules,and1

forallothermodules.

reference Specifiesareferencenumbertobeassociatedwiththisentry.

rate‐limit

number SpecifiesaratelimiterresourceIDtobindtothisentry.

all|group‐type‐index Clearsallnon‐defaultinboundratelimiting referenceentriesora

specificentry.

reference Specifiesareferencenumberoftheentrytobecleared.

Enterasys Matrix DFE-Gold Series User Manual

Questions and Answers: