Enterasys Matrix DFE-Gold Series User Manual

Configuring SNMP Access Rights show snmp access
5-18 SNMP Configuration
Configuring SNMP Access Rights
Purpose
ToreviewandconfigureSNMPaccessrightsandassignviewingprivilegesandsecuritylevelsto
SNMPusergroups.
Commands
show snmp access
UsethiscommandtodisplayaccessrightsandsecuritylevelsconfiguredforSNMPoneormore
groups.
Syntax
show snmp access [groupname] [security-model {v1 | v2c | usm}] [noauthentication
| authentication | privacy] [context context] [volatile | nonvolatile | read-only]
Parameters
Defaults
•Ifgroupnameisnotspecified,accessinformationforallSNMPgroupswillbedisplayed.
•Ifsecurity‐modelisnotspecified ,accessinformationforallSNMPversionswillbedisplayed.
•Ifnoauthentication,authenticationorprivacyarenotspecified,accessinformationforall
securitylevelswillbedisplayed.
•Ifcontextisnotspecified,
allcontextswillbedisplayed.
For information about... Refer to page...
show snmp access 5-18
set snmp access 5-20
clear snmp access 5-21
set snmp timefilter break 5-41
groupname (Optional)DisplaysaccessinformationforaspecificSNMPv3group.
security‐modelv1|
v2c|usm
(Optional)DisplaysaccessinformationforSNMPsecuritymodel
version1,2cor3(usm).
noauthentication|
authentication|
privacy
(Optional)Displaysaccessinformationforaspecificsecuritylevel.
contextcontext (Optional)Displaysaccessinformationforaspecific
context.Fora
descriptionofhowtospecifySNMPcontexts,referto“UsingSNMP
ContextstoAccessSpecificMIBs”onpage 5‐3.
volatile|nonvolatile
|read‐only
(Optional)Displaysaccessentriesforaspecificstoragetype.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English