Enterasys Matrix DFE-Gold Series

show ip slb sticky Configuring Load Sharing Network Address Translation (LSNAT)
Enterasys Matrix DFE-Gold Series Configuration Guide 19-31
Parameters
None.
Defaults
None.
Mode
Routercommand,Anyroutermode.
Example
Thisexampleshowshowtodisplayserverloadbalancingconnectionstatistics:
Matrix>Router#show ip slb stats
created conns established conns deleted conns
---------------------------------------------------------------
3 2 1
show ip slb sticky
Usethiscommandtodisplayserverloadbalancingactivestickyconnections.
Syntax
show ip slb sticky [client ip-address]
Parameters
Defaults
Ifclientisnotspecified,allserverloadbalancingactivestickyconnectionsaredisplayed.
Mode
Routercommand,Anyroutermode.
Examples
Thisexampleshowshowtodisplayallserverloadbalancingactivestickyconnections.
Matrix>Router#show ip slb sticky
client-ip real-server-ip conns ftp-cntrl
------------------------------------------------------------------------
192.170.1.253 192.169.1.11 * 2
192.168.1.90 192.169.2.14 * 0
clientip‐address (Optional)Displaystickyconnectionsforaparticularclient.