Enterasys Matrix DFE-Gold Series

set cos reference txq Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-37
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoclearallClassofServiceinboundratelimitingreferenceentries:
Matrix(rw)->clear cos reference irl all
set cos reference txq
UsethiscommandtosetaClassofServiceinboundratelimitingreferenceconfiguration.
Syntax
set cos reference txq group-type-index reference queue number
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoconfigureinboundratelimitingreferenceresourceentry0forport
group0.1referencingresourcesdefinedbyTXQentry0:
Matrix(rw)->set cos reference irl 0.1 0 queue 0
clear cos reference txq
Usethiscommandtoclearoneorallnon‐defaultClassofServicetransmitqueuereference
configurations.
Syntax
clear cos reference txq {all | group-type-index reference}
group‐type‐index Specifiesatransmitqueueportgroup/typeindexforthisentry.Valid
entriesareintheformofgroup.type.Groupcanbe0‐7,with0
designatingthedefaultgroup,and1‐7reservedforuser‐defined
groups.Defaultporttypevaluescannotbechanged,andare0for
the
7GR4270‐12,7G4270‐12,7G4270‐09,and7G4270‐10DFEmodules,and1
forallothermodules.
reference Specifiesareferencenumbertobeassociatedwiththisentry.
queuenumber SpecifiesatransmitqueueresourceIDtobindtothisentry.