Enterasys Matrix DFE-Gold Series

Reviewing IP Traffic and Configuring Routes show ip protocols
16-22 IP Configuration
Reviewing IP Traffic and Configuring Routes
Purpose
ToreviewIPprotocolinformationaboutthedevice,toreviewIPtrafficandconfigureroutes,to
enableandsendrouterICMP(ping)messages,andtoexecutetraceroute.
Commands
show ip protocols
UsethiscommandtodisplayinformationaboutIPprotocolsrunningonthedevice.
Syntax
show ip protocols
Parameters
None.
Defaults
None.
Mode
Routercommand,Anyroutermode.
Usage
EnablingCIDRforRIPontheEnterasysMatrixSeriesdevicerequiresusingthenoauto‐summary
command(asdescribedin“noauto‐summary”onpage 21‐13)todisableautomaticroute
summarization.
For information about... Refer to page...
show ip protocols 16-22
show ip traffic 16-23
clear ip stats 16-24
show ip route 16-25
ip route 16-26
ip icmp 16-27
ping 16-28
traceroute 16-28