set flowlimit port Configuring Flow Setup Throttling (FST)
Enterasys Matrix DFE-Gold Series Configuration Guide 24-31
Example
Thisexampleshowshowtoshowflowlimitsandassociatedactionsconfiguredforthevarious
portclassifications:
Matrix(rw)->show flowlimit class
Flow setup throttling class configuration:
Class Limit Action
------------------ ---------------------- ---------------------------
userPort limit1 :800 action1 :notify
limit2 :1000 action2 :disable,notify
serverPort limit1 :5000 action1 :notify
limit2 :6000 action2 :disable,notify
aggregatedUserPort limit1 :5000 action1 :notify
limit2 :6000 action2 :disable,notify
interSwitchLink limit1 :14000 action1 :notify
limit2 :16000 action2 :disable,notify
unspecified limit1 :0 action1 :notify
limit2 :0 action2 :disable,notify
set flowlimit port
Usethiscommandtoenableordisableflowlimitingononeormoreport(s),assignaflowlimiting
userclassificationtooneormoreport(s)orenableaninterfacepreviouslydisabledbyaflow
limitingaction.
Syntax
setflowlimitport{enable|disable}|class{userport|serverport|aggregateduser|
interswitchlink|unspecified}|status{operational}[port‐string]
Parameters
enable|disable Enablesordisablesflowli mitingonspecifiedports.
classuserport|
serverport|
aggregateduser|
interswitchlink|
unspecified
Assignsauserclassificationtypetotheport(s)as:
•userport
•serverport
•aggregationport
•interswitchlink
•unspecifiedport
statusoper ational Enablesaninterfacepreviouslydisabledbyaflowlimitingaction.
port‐string (Optional)Specifies
port(s)onwhichtoconfigureflowlimiting
parameters.