Enterasys Matrix DFE-Gold Series

Setting Console Port Properties clear console baud
4-6 Port Configuration
Parameters
Defaults
Ifport‐stringisnotspecified,baudratewillbesetforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosetthebaudrateto19200onconsoleportcom.1.1:
Matrix(rw)->set console baud 19200 com.1.1
clear console baud
Usethiscommandtoclearthebaudrateforoneormoreconsoleports.
Syntax
clear console baud [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,baudratewillbeclearedforallconsoleports.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearthebaudrateonconsoleportcom.1.1:
Matrix(rw)->clear console baud com.1.1
show console flowcontrol
Usethiscommandtodisplaythetypeofflowcontrolsettingforoneormoreconsoleports.
Syntax
show console flowcontrol [port-string]
Parameters
rate Setstheconsolebaudrate.Validvaluesare:300,60 0,1200,2400,4800,
5760,9600,14400,19200,38400,and115200.
port‐string (Optional)Setsbaudrateforspecificport(s).
port‐string (Optional)Clearsbaudrateforspecificport(s).
port‐string (Optional)Displaystheflowcontrolsetting forspecificconsoleport(s).