Enterasys Matrix DFE-Gold Series

Reviewing and Configuring Routing show router
2-102 Startup and General Configuration
show router
Usethiscommandtodisplaywhichmodulethatiscurrentlyrunningroutingservices.TheDFEis
adistributedsystem,whichmeansthateventhoughtheprotocolsarerunningonaspecific
module,routingframesisdonelocallybyeverymodule.
Syntax
show router
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtodisplaythemodulethat iscurrentlyrunningroutingservices.:
Matrix(rw)->show router
Router Services are currently running on module 1
clear router
Usethiscommandtocleartherouterconfiguration.Thiscommandde‐configurestherouterand
willremovethepersistentrouterconfiguration.Itwilleffectivelywriteablankconfigurationfile
topersistentmemory.Beforeusingthiscommand,savethecurrentconfigurationusingtheshow
configoutfilecommandin“showconfig”on
page 2‐85.
Syntax
clear router
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtocleartherouterconfiguration:
Matrix(rw)->clear router