Enterasys Matrix DFE-Gold Series

clear lacp static Configuring LACP
Enterasys Matrix DFE-Gold Series Configuration Guide 4-63
Example
Thisexampleshowshowtoaddportfe.1.6totheLAGofaggregatorport4:
Matrix(rw)->set lacp static lag.0.484 fe.1.6
clear lacp static
UsethiscommandtoremovespecificportsfromaLinkAggregat ion Group.
Syntax
clear lacp static lagportstring port-string
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoremoveFastEthernetport6inmodu le1fromtheLAGofaggregator
port4:
Matrix(rw)->clear lacp static lag.0.484 fe.1.6
show lacp singleportlag
UsethiscommandtodisplaythestatusofthesingleportLAGfunction.
Syntax
show lacp singleportlag
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
lagportstring SpecifiestheLAGaggregatorportfromwhichportswillberemoved.
port‐string Specifiestheport(s)toremovefromtheLAG.Foradetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedinthe
CLI”onpage 4‐2.