Enterasys Matrix DFE-Gold Series

show multiauth session Configuring Multiple Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 27-9
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearthemultipleauthenticationstationentryassociatedwithport
fe.1.20:
Matrix(rw)->clear multiauth station port fe.1.20
show multiauth session
Usethiscommandtodisplaymultipleauthenticationsessionentries.
Syntax
show multiauth session [all] [agent { dot1x | mac | pwa | cep}] [mac address] [port
port-string]
Parameters
Defaults
Ifnooptionsarespecified,multipleauthenticationsessionentrieswillbedisplayedforall
sessions,authenticationtypes,MACaddresses,andports.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaymultipleau thenticationsession:
Matrix(rw)->show multiauth session
Multiple authentication session entries
-----------------------------------------
Port : fe.2.2 Station address : 00-01-f4-2b-4f-8b
Auth status : success Last attempt : MON MAY 08 14:34:42 2006
Agent type : pwa Session applied : true
Server type : radius VLAN-Tunnel-Attr : None
Policy index : 0 Policy name : No policy applied
Session timeout : 43200 Session duration : 0,00:01:01
Idle timeout : 300 Idle time : 0,00:00:00
all (Optional)Displaysinformationaboutallsessions,includingthose
withterminatedstatus.
agent|dot1x|mac|
pwa|cep
(Optional)Displays802.1X,MAC,CEP,orportwebauthentication
sessioninformation.
macaddress (Optional)Displaysmultipleauthenticationsessionentriesforspecific
MACaddress(es).
portport‐string (Optional)Displaysmultipleauthenticationsessionentriesfor
specific
port(s).