Assigning Classification Rules to Policy Profiles clear policy all-rules
8-16 Policy Classification Configuration
Defaults
Whenapplicable,data,mask,andport‐stringmustbespecifiedforindividualrulestobecleared.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtodeleteallclassificationruleentriesassociatedwithpolicyprofile1
fromallports:
Matrix(rw)->clear policy rule 1 all-pid-entries
clear policy all-rules
Usethiscommandtoremovealladminandclassificationrules.
Syntax
clear policy all-rules
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoremovealladministrativeandclassificationrules:
Matrix(rw)->clear policy all-rules
macdest DeletesassociatedMACdestinationaddressclassificationrule.
macsource DeletesassociatedMACsourceaddressclassificationrule.
port Deletesassociatedport‐stringclassificationrule.
tcpdestport DeletesassociatedTCPdestinationportclassificationrule.
tcpsourceport DeletesassociatedTCPsourceportclassificationrule.
udpdestport DeletesassociatedUDPdestinationportclassificationrule.
udpsourceport DeletesassociatedUDPsourceportclassification
rule.
all‐traffic‐entries|
data
(Optional)Deletesallentriesassociatedwiththistrafficruleora
specificdatavalueentry.RefertoTable 8‐3forvalidvaluesforeach
classificationtype.
maskmask (Optional)Deletesassociateddatamask.RefertoTable 8‐3forvalid
valuesforeachclassificationtypeand
datavalue.
port‐stringport‐string (Optional)Deletesspecifiedruleentriesforspecificingressport(s).