Enterasys Matrix DFE-Gold Series

Configuring RMON show rmon alarm
11-20 Network Monitoring Configuration
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtodeleteRMONhistoryentry1:
Matrix(rw)->clear rmon history 1
show rmon alarm
UsethiscommandtodisplayRMONalarmentries.
Syntax
show rmon alarm [index]
Parameters
Defaults
Ifindexisnotspecified,informationaboutallRMONalarmentrieswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Usage
TheRMONalarmgroupperiodicallytakesstatisticalsamplesfromRMONvariablesand
comparesthemwithpreviouslyconfiguredthresholds.Ifthemonitoredvariablecrossesa
thresholdanRMONeventisgenerated.
Example
ThisexampleshowshowtodisplayRMONalarmentry3:
Matrix(rw)->show rmon alarm 3
Index 3
---------------------
Owner = Manager
Status = valid
Variable = 1.3.6.1.4.1.5624.1.2.29.1.2.1.0
index‐list Specifiesoneormorehistoryentriestobedeleted,causingthemto
disappearfromanyfutureRM ONqueries.
to‐defaults Resetsallhistoryentriestodefaultvalues.Thiswillcauseentriesto
reappearinRMONqueries.
index (Optional)DisplaysRMONalarmentriesforaspecificentryindexID.