Enterasys Matrix DFE-Gold Series

Configuring RMON set rmon channel
11-36 Network Monitoring Configuration
Example
ThisexampleshowshowtodisplayRMONchannelinformationforfe.2.12:
Matrix(rw)->show rmon channel fe.2.12
Port fe.2.12 Channel index= 628 EntryStatus= valid
----------------------------------------------------------
Control off AcceptType matched
OnEventIndex 0 OffEventIndex 0
EventIndex 0 Status ready
Matches 4498
Description Thu Dec 16 12:57:32 EST 2004
Owner NetSight smith
set rmon channel
UsethiscommandtoconfigureanRMONchannelentry.
Syntax
set rmon channel index port-string [ accept { matched | failed}] [control { on | off}]
[onevent onevent] [offevent offevent] [event event] [estatus {ready | fired |
always}] [description description] [owner owner]
Parameters
index Specifiesanindexnumberforthisentry.Anentrywillautomaticallybe
createdifanunusedindexnumberischosen.Maximumnumberof
entriesis2.Maximumvalueis65535.
port‐string Specifiestheportonwhichtrafficwillbemonitored.
acceptmatched|
failed
(Optional)Specifiestheactionofthe
filtersonthischannelas:
• matched‐Packetswillbeacceptedonfiltermatches
• failed‐Packetswillbeacceptediftheyfailamatch
controlon|off (Optional)Enablesordisablescontroloftheflowofdatathroughthe
channel.
oneventonevent (Optional)SpecifiestheindexoftheRMONeventthatwill
turnthis
channelon.
offeventoffevent (Optional)SpecifiestheindexoftheRMONeventthatwillturnthis
channeloff.
eventevent (Optional)Specif iestheeventtobetriggeredwhenthechannelison
andapacketisaccepted
estatusready|fired|
always
(Optional)Specifiesthestatusoftheeventas:
• ready
‐Asingleeventmaybegenerated.
• fired‐Noadditionaleventsmaybegenerated.
• always‐Aneventwillbegeneratedforeverymatch.
descriptiondescription (Optional)Specifiesadescriptionforthischannel.
owner (Optional)Specifiesthenameoftheentitythatconfiguredthisentry.