Enterasys Matrix DFE-Gold Series User Manual

show logging server Configuring System Logging
Enterasys Matrix DFE-Gold Series Configuration Guide 10-3
1 80.80.80.252 local7 debugging(8) N-Series 514 enabled
Defaults: local4 debugging(8) 514
Syslog Console Logging enabled
Syslog File Logging disabled
Table 10‐1providesanexplanationofthecommandoutput.
show logging server
UsethiscommandtodisplaytheSyslogconfigurationfor aparticularserver.
Syntax
show logging server [index]
Parameters
Table 10-1 show logging all Output Details
Output... What it displays...
Application A mnemonic abbreviation of the textual description for applications
being logged.
Current Severity Level Severity level (1 - 8) at which the server is logging messages for the
listed application. For details on setting this value using the set
logging application command, refer to “set logging application” on
page 10-9.
Defaults Default facility name, severity level and UDP port designation (as
described below.) For details on setting this value using the set
logging defaults command, refer to “set logging default” on
page 10-6.
IP Address Syslog server’s IP address. For details on setting this using the set
logging server command, refer to “set logging server” on page 10-4.
Facility Syslog facility that will be encoded in messages sent to this server.
Valid values are: local0 to local7.
Severity Severity level at which the server is logging messages.
Description Text string description of this facility/server.
Port UDP port the client uses to send to the server.
Status Whether or not this Syslog configuration is currently enabled or
disabled.
index (Optional)DisplaysSysloginformationpertainingtoaspecificserver
tableentry.Validvaluesare1‐8.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English