Enterasys Matrix DFE-Gold Series

show config Managing Configuration and Image Files
Enterasys Matrix DFE-Gold Series Configuration Guide 2-85
!
# cdp
!
# console
!
show config
Usethiscommandtodisplaythesystemconfigurationorwritetheconfigurationtoafile.
Syntax
show config [all] [facility] [outfile outfile]
Parameters
Defaults
Ifnoparametersarespecified,onlynon‐defaultsystemconfigurationsettingswillbedisplayed.
Mode
Switch,Read‐Write.
Example
Thisexampleshowshowtodisplaythecurrentnon‐defaultdeviceconfiguration:
Matrix(su)->show config
This command shows non-default configurations only.
Use 'show config all' to show both default and non-default configurations.
begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
# Router Configuration
begin router
router
enable
config t
router id 2.2.2.2
all (Optional)Displaysdefaultandnon‐defaultconfigurationsettings.
facility (Optional)Displaystheconfigurationforaspecificfacility.
outfileoutfile (Optional)Specifiesafileinwhichtostoretheconfiguration.