Enterasys Matrix DFE-Gold Series User Manual

set maclock enable Configuring MAC Locking
Enterasys Matrix DFE-Gold Series Configuration Guide 24-5
set maclock enable
UsethiscommandtoenableMAClockingononeormoreports.
Syntax
set maclock enable [port_string]
Parameters
Defaults
Ifport_stringisnotspecified,MAClockingwillbeenabledonallports.
Mode
Switchcommand,Read‐Write.
Usage
MAClockingisdisabledbydefaultatdevicestartup.ConfiguringoneormoreportsforMAC
lockingrequiresgloballyenablingitonthedeviceandthenenablingitonthedesiredportsas
describedin“setmaclock”onpage 24‐6.
WhenenabledandconfiguredforaspecificMACaddressand
portstring,thislocksaportsothat
onlydesignatedendstationaddressesareallowedtoparticipateinframerelay.
Example
ThisexampleshowshowtoenableMAClockingonfe.2.3:
Matrix(rw)->set maclock enable fe.2.3
set maclock disable
UsethiscommandtodisableMAClockingononeormoreports.
Syntax
set maclock disable [port_string]
Status Whether the end stations are active or inactive.
State Whether the end station locked to the port is a first learned, first
arrival or static connection.
Table 24-2 show maclock stations Output Details
Output... What it displays...
port_string (Optional)EnablesMAClockingonspecificport(s).Foradetailed
descriptionofpossiblep o rt_stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English