Enterasys Matrix DFE-Gold Series User Manual

clear port vlan Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Enterasys Matrix DFE-Gold Series Configuration Guide 7-11
Example
Thisexampleshowshowtoaddfe.1.10totheportVLANlistofVLAN4(PVID4).SinceVLAN4
isanewVLAN,itiscreated.Thenportfe.1.10isaddedtoVLAN4’suntaggedegresslist,andis
clearedfromtheegresslistofVLAN1(thedefaultVLAN):
Matrix(rw)->set port vlan fe.1.10 4
Matrix(rw)->set vlan 4 create
Matrix(rw)->set vlan egress 4 fe.1.10 untagged
Matrix(rw)->clear vlan egress 1 fe.1.10
clear port vlan
Usethiscommandtoresetaport’s802.1QportVLANID(PVID)tothehostVLANID1.
Syntax
clear port vlan port-string
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresettheFastEthernetports3and11inmodule1toaVLAN IDof1
(HostVLAN):
Matrix(rw)->clear port vlan fe.1.3,fe.1.11
show vlan interface
UsethiscommandtodisplaytheMIB‐IIinterfaceentrymappedtoaVLAN.
Syntax
show vlan interface [vlan-list]
Parameters
Defaults
Ifvlan‐listisnotspecified,MIB2interfaceentrieswillbedisplayedforallVLANs.
port‐string Specifiestheport(s)toberesettothehostVLANID1.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage 4 ‐2.
vlan‐list (Optional)DisplaystheMIB2interfaceentryforspecificVLAN(s).

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English