show cos port-resource Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-31
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearallnon‐defaultCoStransmitqueueportgroupentries:
Matrix(rw)->clear cos port-config txq all
show cos port-resource
UsethiscommandtodisplayClassofServiceportresourceconfigurationinformation.
Syntax
show cos port-resource irl group-type-index [resource] [violators]
Parameters
Defaults
Ifnooptionsarespecified,allratelimitinginformationforallporttypeswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtoshowallinboundratelimitingportresourceconfiguration
informationforportgroup0.1:
Matrix(rw)->show cos port-resource irl 0.1
'?' after the rate value indicates an invalid rate value
Group Index Resource Type Unit Rate Rate Limit Type Action
----------- -------- ---- ---- ---------- --------------- -----
0.1 0 irl perc none drop none
0.1 1 irl perc none drop none
0.1 2 irl perc none drop none
0.1 3 irl perc none drop none
0.1 4 irl perc none drop none
0.1 5 irl perc none drop none
0.1 6 irl perc none drop none
0.1 7 irl perc none drop none
irl|txq (Optional)Displaysinboundratelimitingortransmitqueue
information.
group‐type‐index (Optional)Displaysinformationforaspecificportgroup/typeentry.
resource (Optional)Displaysratelimitersortransmitqueuesassociatedwith this
entry.
violators (Optional)Displaysportsthathaveviolatedinboundratelimiters.