Enterasys Matrix DFE-Gold Series

clear rmon host Configuring RMON
Enterasys Matrix DFE-Gold Series Configuration Guide 11-29
Example
ThisexampleshowshowtoenableRMONhostentry1:
Matrix(rw)->set rmon host status 1 enable
clear rmon host
UsethiscommandtodeleteanRMONhostentry.
Syntax
clear rmon host index
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoclearRMONhostentry1:
Matrix(rw)->clear rmon host 1
show rmon topN
UsethiscommandtodisplaysRMONTopNpropertiesandstatistics.TopNmonitoringprepares
tablesthatdescribethehoststoppingalistorderedbyoneoftheirstatistics.TopNlistsare
samplesofoneofthehostsbasestatisticsoveraspecificinterval.
Syntax
set rmon topN [index]
Parameters
Defaults
Ifindexisnotspecified,informationaboutallentrieswillbedisplayed.
Mode
Switchcommand,Read‐Only.
index Specifiestheindexnumberoftheentrytobecleared.
index (Optional)DisplaysRMONpropertiesandstatisticsforaspecificentry
indexID.