set pwa ipaddress Configuring Port Web Authentication (PWA)
Enterasys Matrix DFE-Gold Series Configuration Guide 25-19
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtosetthePWAredirecttimeto10seconds:
Matrix(rw)->set pwa redirecttime 10
set pwa ipaddress
UsethiscommandtosetthePWAIPaddress.
Syntax
set pwa ipaddress ip-address
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
ThisistheIPaddressoftheendstation fromwhichPWAwillpreventnetworkaccessuntilthe
userisauthenticated.
Example
ThisexampleshowshowtosetaPWAIPaddressof1.2.3.4:
Matrix(rw)->set pwa ipaddress 1.2.3.4
set pwa protocol
Usethiscommandtosettheportwebauthenticationprotocol.
Syntax
set pwa protocol {chap | pap}
ip‐address SpecifiesagloballyuniqueIPaddress.Thissamevaluemustbe
configuredintoeveryauthenticatingswitchinthedomain.