Enterasys Matrix DFE-Gold Series User Manual

show snmp context Configuring SNMP MIB Views
Enterasys Matrix DFE-Gold Series Configuration Guide 5-23
View Type = included
Storage type = nonVolatile
Row status = active
View Name = All
Subtree OID = 0.0
Subtree mask =
View Type = included
Storage type = nonVolatile
Row status = active
View Name = Network
Subtree OID = 1.3.6.1.2.1
Subtree mask =
View Type = included
Storage type = nonVolatile
Row status = active
Table 5‐8providesanexplanationofthecommandoutput.Fordetailsonusingthesetsnmpview
commandtoassignvariables,referto“setsnmpview”onpage 5‐24.
show snmp context
UsethiscommandtodisplaythecontextlistconfigurationforSNMP’sview‐basedaccesscontrol.
Syntax
show snmp context
Parameters
None.
Defaults
None.
Table 5-8 show snmp view Output Details
Output... What it displays...
View Name Name assigned to a MIB view.
Subtree OID Name identifying a MIB subtree.
Subtree mask Bitmask applied to a MIB subtree.
View Type Whether or not subtree use must be included or excluded for this
view.
Storage type Whether storage is in nonVolatile or Volatile memory
Row status Status of this entry: active, notInService, or notReady.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English