Configuring Policy Class of Service (CoS) set cos port-config irl
8-28 Policy Classification Configuration
Port Group :0
Port Type :1
Assigned Ports :ge.2.1-30;ge.3.1-30;ge.4.1-30;fe.6.1-48;ge.6.1-6;fe.7.1-72
Arbiter Mode :Strict
Slices/queue :Q [ 0]: 0 Q [ 1]: 0 Q [ 2]: 0 Q [ 3]: 32
Percentage/queue :Q [ 0]: 0% Q [ 1]: 0% Q [ 2]: 0% Q [ 3]: 100%
----------------------------------------------------------------------
Inbound Rate Limiting Port Configuration Entries
----------------------------------------------------------------------
Port Group Name :DFE-P 32 IRL
Port Group :0
Port Type :0
Assigned Ports :ge.1.1-12
----------------------------------------------------------------------
Port Group Name :DFE-P 8 IRL
Port Group :0
Port Type :1
Assigned Ports :ge.2.1-30;ge.3.1-30;ge.4.1-30;fe.6.1-48;ge.6.1-6;fe.7.1-72
----------------------------------------------------------------------
set cos port-config irl
UsethiscommandtosettheClassofServiceinboundratelimitingportgroupconfiguration:
Syntax
set cos port-config irl group-type-index [name name] [ports port-list] [append] |
[clear]
Parameters
Defaults
•Ifanameisnotspecified,defaultnamesdescribedinTable 8‐5willbeapplied.
•Ifnotspecified,thisconfigurationwillbeappliedtoallportsintheportgroup.
•Ifappendorcleararenotspecified,port(s)willbeappendedtothespecifiedportgrouping.
group‐type‐index Specifiesaninbound
ratelimitingportgroup/typeindexforthisentry.
Validentriesareinthe formofgroup.type.Groupcanbe0‐7,with0
designatingthedefaultgroup,and1‐7reservedforuser‐defined
groups.Defaultporttypevaluescannotbechanged,andare0forthe
7GR4270‐12,7G4270‐
12,7G4270‐09,and7G4270‐10DFEmodulesonly,
and1forallothermodules.
name
name (Optional)Specifiesanameforthisconfiguration.
ports
port-list (Optional)Appliesthisconfigura tiontooneormoreportsintheport
group.
append|clear (Optional)Appendsorclearsportdesignationsfromapreviously
configuredportgroup.
To Next Page
Loading...
Need help?
General