Enterasys Matrix DFE-Gold Series

Setting Basic Device Properties clear summertime
2-44 Startup and General Configuration
Mode
Switchcommand,Read‐Write.
Usage
Thesesettingswillstartandstopdaylightsavingstimeatthespecifieddayofthemonthandhour
eachyearandwillnothavetoberesetannually.
Example
ThisexampleshowshowsetdaylightsavingstimetorecurstartdateofApril4,2004at2a.m.and
anendingdateofOctober31,2004at2a.m.withanoffsettimeofonehour:
Matrix(rw)->set summertime recurring first Sunday April 02:00 last Sunday October
02:00 60
clear summertime
Usethiscommandtoclearthedaylightsavingstimeconfiguration.
Syntax
clear summertime
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearthedaylightsavingstimeconfiguration:
Matrix(rw)->clear summertime
set prompt
Usethiscommandtomodifythecommandprompt.
Syntax
set prompt “prompt_string”
Parameters
prompt_string
Specifiesatextstringforthecommandprompt.
Note: A prompt string containing a space in the text must be enclosed in quotes
as shown in the example below.