Enterasys Matrix DFE-Gold Series

Configuring IGMP set igmp remove-static
9-12 IGMP Configuration
Defaults
Ifnotspecified,thestaticentrywillbecreatedandnotmodified.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoaddportfe.1.3totheIGMPgroupat224.0.2(VLAN105):
Matrix(rw)->set igmp add-static 224.0.0.2 105 modify include-ports fe.1.3
set igmp remove-static
UsethiscommandtodeleteastaticIGMPentry,ortoremoveoneormoreportsfromanexisting
entry.
Syntax
set igmp remove-static group vlan-list [modify] [include-ports] [exclude-ports]
Parameters
Defaults
Ifnotspecified,thestaticentrywillberemovedandnotmodified.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoremoveportfe.1.3fromtheIGMPgroupat224.0.2(VLAN105):
Matrix(rw)->set igmp remove-static 224.0.0.2 105 modify include-ports fe.1.3
modify (Optional)Addsnewportstoanexistingentry.
include‐ports (Optional)Portorrangeofports.
exclude‐ports (Optional)Portorrangeofports.
group SpecifiesagroupIPaddressfortheentry.
vlan‐list SpecifiestheVLAN(s)onwhichtoconfiguretheentry.
modify (Optional)Addsnewportstoanexistingentry.
include‐ports (Optional)Portorrangeofports.
exclude‐ports (Optional)Portorrangeofports.