Enterasys Matrix DFE-Gold Series

key Configuring RIP
Enterasys Matrix DFE-Gold Series Configuration Guide 21-9
Example
ThisexampleshowshowtocreateaRIPauthenticationkeychaincalled“md5key”:
Matrix>Router(config)#key chain md5key
key
UsethiscommandtoidentifyaRIPauthenticationkeyonakeychain.
Syntax
key key-id
no key key-id
Parameters
Defaults
None.
Mode
Routercommand,Keychainconfiguration:Matrix>Router(config‐keychain)#
Usage
ThisreleaseoftheEntera sysMatrixSeriesfirmwaresupportsonlyonekeyperkeychain.
The“no”formofthiscommandremovesthekeyfromthekeychain.
Example
Thisexampleshowshowtocreateauthenticationkey3withinthekeychaincalled“md5key”:
Matrix>Router(config-router)#key chain md5key
Matrix>Router(config-keychain)#key 3
key-string
UsethiscommandtospecifyaRIPauthenticationstringforakey.Onceconfigured,thisstring
mustbesentandreceivedinRIPpacketsinorderforthemtobeauthenticated.
Syntax
key-string text
no key-string text
key‐id Specifiesanauthenticationnumberforakey.Validnumberarefrom0
to4294967295.Onlyonekeyissupportedperkeychaininthis
EnterasysMatrixSeriesrelease.