Configuring System Logging set logging local
10-12 System Logging Configuration
set logging local
Usethiscommandtoconfigurelogmessagestotheconsoleandapersistentfile.
Syntax
set logging local console {enable | disable} file {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thiscommandshowshowtoenableloggingtotheconsoleanddisableloggingtoapersistentfile:
Matrix(rw)->set logging local console enable file disable
clear logging local
Usethiscommandtocleartheconsoleandpersistentstoreloggingforthelocalsession.
Syntax
clear logging local
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearlocallogging:
Matrix(rw)->clear logging local
consoleenable|
disable
Enablesordisablesloggingtotheconsole.
fileenable|disable Enablesordisablesloggingtoapersistentfile.