Enterasys Matrix DFE-Gold Series

Configuring LACP clear lacp state
4-60 Port Configuration
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtodisableLACP:
Matrix(rw)->set lacp disable
clear lacp state
UsethiscommandtoresetLACPtothedefaultstateofenabled.
Syntax
clear lacp state
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoresetLACPtoenabled
Matrix(rw)->clear lacp state
set lacp asyspri
UsethiscommandtosettheLACPsystempriority.
Syntax
setlacpasysprivalue
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
asyspri Setsthesystemprioritytobe usedincreatingaLAG(LinkAggregation
Group)ID.Validvaluesare0to65535.
value Specifiesasystempriorityvalue.Validvaluesare0to65535,with
precedencegiventolowervalues.