Enterasys Matrix DFE-Gold Series User Manual

Reviewing Existing VLANs show vlan
7-4 802.1Q VLAN Configuration
Parameters
Defaults
Ifnooptionsarespecified,allinformationrelatedtostaticanddynamicVLANswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayinformationforVLAN1.Inthiscase,VLAN1isnamed
“DEFAULTVLAN”anditisenabledtooperate.Portsallowedtotransmitframesbelongingto
VLAN1arelistedasegressports.Portsthatwon’tincludeaVLANtagintheirtransmittedframes
are
listedasuntaggedports.Therearenoforbiddenports(preventedfromtransmittedframes)on
VLAN1:
Matrix(rw)->show vlan 1
VLAN: 1 NAME: DEFAULT VLAN Status: Enabled
VLAN Type: Permanent FID: 1
Creation Time: 4 days 9 hours 4 minutes 50 seconds ago
Egress Ports
host.0.1, fe.1.1-10, ge.2.1-4, fe.3.1-7, lag.0.1-32
Forbidden Egress Ports
None.
Untagged Ports
host.0.1, fe.1.1-10, ge.2.1-4, fe.3.1-7, lag.0.1-32
Table 7‐2providesanexplana tion ofthecommandoutput.
static (Optional)DisplaysinformationrelatedtostaticVLANs.StaticVLANs
aremanuallycreatedusingthesetvlancommand(“setvlan”on
page 7‐6),SNMPMIBs,ortheWebViewmanagementapplication.The
defaultVLAN ,VLAN1,isalwaysstaticallyconfiguredandcan’tbe

deleted.OnlyportsthatuseaspecifiedVLANastheirdefaultVLAN
(PVID)willbedisplayed.
vlan‐list (Optional)DisplaysinformationforaspecificVLANorrangeof
VLANs.
Table 7-2 show vlan Output Details
Output... What it displays...
VLAN VLAN ID.
NAME Name assigned to the VLAN.
Status Whether it is enabled or disabled.
VLAN Type Whether it is permanent (static) or dynamic.
FID Filter Database ID of which this VLAN is a member.
Creation Time Time elapsed since the VLAN was created.
Egress Ports Ports configured to transmit frames for this VLAN.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English