Enterasys Matrix DFE-Gold Series

clear tacacs server Configuring TACACS+
Enterasys Matrix DFE-Gold Series Configuration Guide 25-67
clear tacacs server
UsethiscommandtoremoveoneorallconfiguredTACACS+servers,ortoreturnthetimeout
valuetoitsdefaultvaluefor oneor allconfiguredTA CACS+ servers.
Syntax
clear tacacs server {all | index} [timeout]
Parameters
Defaults
Iftimeoutisnotspecified,theaffectedTACACS+serverswillberemoved.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleremovesTACACS+server1.
Matrix(rw)->clear tacacs server 1
show tacacs session
UsethiscommandtodisplaythecurrentTACACS+clientsessionsettings.
Syntax
show tacacs session {authorization | accounting [state]}
Parameters
Defaults
Ifstateisnotspecified,allsession accountingconfigurationparametersaredisplayed(whichat
thistimeincludesonlytheenabled/disabledstatus).
Mode
Switchcommand,Read‐Only.
Examples
Thisexampleshowshowtodisplayclientsessionauthorizationinformation:
all SpecifiesthatallconfiguredTACACS+serversshouldbeaffected.
index
SpecifiesoneTACACS+servertobeaffected.
timeout (Optional)Returnthetimeoutvaluetoitsdefaultvalueof10seconds.
authorization Displayclientsessionauthorizationsettings.
accounting Displayclientsessionaccountingsettings.
state (Optional)Displaytheclientsessionaccountingstate.