Enterasys Matrix DFE-Gold Series User Manual

clear multiauth trap Configuring Multiple Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 27-15
Parameters
Defaults
Allsendingofmultiauthtrapsdisabled.
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtoenablethemultiauthsystemtrapsetting:
Matrix(rw)->set multiauth trap system enabled
Thisexampleshowshowtoenableallmultiauthporttrapsetting:
Matrix(rw)->set multiauth trap port ge.1.1 all
clear multiauth trap
Usethiscommandtoclearthesystem’smultipleauthenticationtrapsettings.
Syntax
clear multiauth trap {system | module | port portstring {all | success | failed |
terminated | max-reached}}
Parameters
system Configuresmultiauthsystemtrapsetting sasfollows:
enabled - traps are sent when max users reached in system
disabled - traps are not sent when max users reached in system
module Configuresmultiauthmoduletrapsettingsasfollows:
enabled - traps are sent when max users reached in module
disabled - traps are not sent when max users reached in module
portportstring Configuresmultiauthporttrapsettingsfortheportspecifiedin
portstring.
all
Enables sending all traps for the specified port.
success
Enables sending success traps for the specified port.
failed
Enables sending failed traps for the specified port.
terminated
Enables sending terminated traps for the specified port.
max‐reached
Enables sending max number users reached traps for the specified port.
portportstring Clearstheconfigurationofmultiauthporttrapsettingsfortheport
specifiedinportstring.
all
Enables sending all traps for the specified port.
success
Enables sending success traps for the specified port.
failed
Enables sending failed traps for the specified port.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English