Enterasys Matrix DFE-Gold Series

Configuring Policy Class of Service (CoS) clear policy port-hit
8-22 Policy Classification Configuration
Purpose
Toconfigurepolicy‐basedClassofService.
Commands
Define IRL or TXQ resources (data rates or transmit priorities). set cos port-resource irl
set cos port-resource txq
Bind a CoS reference index ID to a defined resource. set cos reference irl
set cos reference txq
Bind an IRL or TXQ reference ID to a CoS setting index ID. set cos setting
Associate CoS index IDs to policy rules. set policy rule
Table 8-4 Configuring User-Defined CoS
To do this.... Use these commands...
For information about... Refer to page...
show cos state 8-23
set cos state 8-23
show cos port-type 8-24
show cos unit 8-26
show cos port-config 8-27
set cos port-config irl 8-28
clear cos port-config irl 8-29
set cos port-config txq 8-29
clear cos port-config txq 8-30
show cos port-resource 8-31
set cos port-resource irl 8-32
clear cos port-resource irl 8-33
set cos port-resource txq 8-33
clear cos port-resource txq 8-34
show cos reference 8-35
set cos reference irl 8-36
clear cos reference irl 8-36
set cos reference txq 8-37
clear cos reference txq 8-37
show cos settings 8-38
set cos settings 8-39
clear cos settings 8-39
show cos violation irl 8-40