To Next Page

To Previous Page

Configuring MAC Authentication set macauthentication reauthentication

25-34 Authentication Configuration

Defaults

None.

Mode

Switchcommand,Read‐Write.

Example

ThisexampleshowshowtoforcetheMACauthenticationsessionforaddress00‐60‐97‐b5‐4c‐07to

re‐initialize:

Matrix(rw)->set macauthentication macinitialize 00-60-97-b5-4c-07

set macauthentication reauthentication

UsethiscommandtoenableordisablereauthenticationofallcurrentlyauthenticatedMAC

addressesononeormoreports.

Syntax

set macauthentication reauthentication {enable | disable} port-string

Parameters

Defaults

None.

Mode

Switchcommand,Read‐Write.

Example

ThisexampleshowshowtoenableMACreauthenticationonge.4.1though5:

Matrix(rw)->set macauthentication reauthentication enable ge.4.1-5

set macauthentication portreauthenticate

Usethiscommandtoforceanimmediatereauthenticationofthecurrentlyactivesessionsonone

ormoreMACauthenticationports.

Syntax

set macauthentication portreauthenticate port-string

enable|disable EnablesordisablesMACreau thentication.

port‐string Specifiesport(s)onwhichtoenableordisableMA Creauthentication.

Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port

StringSyntaxUsedintheCLI”onpage 4‐2.

Enterasys Matrix DFE-Gold Series User Manual

Questions and Answers: