Enterasys Matrix DFE-Gold Series

Configuring RMON clear rmon topN
11-32 Network Monitoring Configuration
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoenableRMONTopNentry1:
Matrix(rw)->set rmon topN status 1 enable
clear rmon topN
UsethiscommandtodeleteanRMONTopNentry.
Syntax
clear rmon topN index
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtodeleteRMONTopNentry1:
Matrix(rw)->clear rmon topN 1
show rmon matrix
UsethiscommandtodisplayRMONmatrixpropertiesandstatistics.TheRMONmatrixstores
statisticsforconversationsbetweensetsoftwoaddresses.
Syntax
show rmon matrix [port-string] [source | dest]
index Specifiesanindexnumberforthisentry.Maximumnumberofentriesis
10.Maximumvalueis65535.
enable EnablesthisTopNentry.
index Specifiestheindexnumberoftheentrytobecleared.