Enterasys Matrix DFE-Gold Series

show ssh state Configuring Secure Shell (SSH)
Enterasys Matrix DFE-Gold Series Configuration Guide 24-11
Configuring Secure Shell (SSH)
Purpose
Toreview,enable,disable,andconfiguretheSecureShell(SSH)protocol,whichprovidessecure
Telnet.
Commands
show ssh state
UsethiscommandtodisplaythecurrentstatusofSSHonthedevice.
Syntax
show ssh state
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Examples
ThisexampleshowshowtodisplaySSHstatusonthede vice:
Matrix(rw)->show ssh state
SSH Server status: Disabled.
set ssh
Usethiscommandtoenable,disableorreinitializeSSHserveronthedevice.
Syntax
set ssh {enable | disable | reinitialize}
For information about... Refer to page...
show ssh state 24-11
set ssh 24-11
set ssh hostkey 24-12
show router ssh 24-12
set router ssh 24-13
clear router ssh 24-13